We have several items we are over stocked on and will sell at reduced prices.
We have a limited quantity of each available.
When the supply runs out we will refund that part of your order if we had not had a chance
to update the web site.
|
I recommend using a thin sheet of brass or copper between the texture plate and the roller to protect the rolling mill.
We have been working to perfect our process for etching steel texture plates for our electro-etching classes.
This work has resulted in a number of texture plate samples we would like to clear from our work bench.
The etching on these samples may not be perfect, but they will give a good 2" x 2", or 1.5" x 6", impression.
These plates may have a slight curvature due to our testing, so they are best used with a rolling mill.
I expect we will be adding more plates to this section as our work continues.
Over time and depending on usage, the texture plate will become curved when used in a rolling mill.
The curvature does not affect the plates usage, but sometimes makes it a little harder to feed the stack into the rolling mill.
We are cleaning our library of books on techniques that we are no longer pursuing. I take care of my books, so all these books are in like new condition.
|
|
We have used tools available because we are reducing our teaching activity, or for techniques that we are no longer actively pursuing.
Hint: New entries are added at the end.
|
|
|
|
|
|
|
|
|
|
Please contact us if we may be of assistance to you.
